Formwork Blog

Posts Tagged ‘Prominent Hill’

Location: Prominent Hill Mining Construction Site South Australia

Mechanical Fitter Leigh (Hollywood) giving Admin LJ a few welding tips.

Leigh and LJ at Prominent Hill Mine

Location: Prominent Hill Construction Site and Camp

A nice collection of Prominent Hill photos by Zane Swart. This collection contains 506 photos of around the Prominent Hill Mine job, and other fun after work hours stuff. Start Slideshow

Zane and Yabbie at Prominent Hill

View Zane’s Prominent Hill photo collection.

Shane Chooking Yabbies

Thanks for that Zane

Location: Prominent Hill Mining Construction Site South Australia – Weigh Bridge Section

While the sump with ladder formwork was a pain in the neck to construct due to the fiddly ladder treads, it is always good to see that the job turned out pretty good.

Concrete Sump with Ladder

Concrete patchers will now come along and plug the z-bar holes.

Location: Prominent Hill Mining Construction Site South Australia

Concrete poured into four tread stair formwork and the formwork has just been stripped by the formworkers. It looks like these stairs might need to be patched up in order to fill in all the air bubbles on the surface of the concrete, but other than that, a job well done.

Four Tread Concrete Stairs

Location: Prominent Hill Mining Construction Site South Australia

Four concrete forms held together with Column-Clamps and held down with spaghetti nailed plywood. The 700 mm long bolts took a bit of work to cast in due to the extra reinforcement steel positioned exactly in the center of the pedestal.

Pedestal Formwork Ready For Concrete

This job was not as bad as the nightmare pedestal, but still took extra time because the formworkers had to reposition the steel in order to fit the bolts in.

Concretors Anthony and Nev Vibrating Pedestal Concrete

To ensure the correct heights, the concrete and bolt-top heights were established from a known benchmark with a Laser Level instrument and not by just measuring up from the foundation concrete.

Location: Prominent Hill Mining Construction Site South Australia

Formworkers Ed and Rami at Prominent Hill Mine. 99% of the formwork construction jobs are now complete so Ed and Rami will fly-out today. A couple of formwork carpenters remain to do “shits and bits”, odd jobs etc.

Ed and Rami at Prominent Hill

Location: Prominent Hill Mining Construction Site South Australia

Today, safety advisor Pothole is celebrating his birthday on the job at Prominent Hill Mine.

Happy birthday Pothole.

Pothole and Birthday Cake

Location: Prominent Hill Mining Construction Site South Australia

This four tread stair formwork is held together with 4 z-bar bolts, held down with pins at the front and wedges (to the structure) at the back, and braced with one timber on each side and two timbers at the back. Four verticle plywood cleats were also added to the back corners to prevent the rear concrete form from blowing out.

Wooden Concrete Forms for Stairs

Location: Prominent Hill Mining Construction Site South Australia

Concrete pump operator Mitch has finished the last concrete pumping job here at Prominent Hill Mine. Mitch packed up the concrete pump yesterday afternoon and has headed back to Adelaide. Mitch will probably team up again with Frank, so see you around the traps Mate.

Concrete Pump Operator Mitch

See more photos of Mitch at Kane’s Birthday BBQ.

Location: Prominent Hill Mining Camp Airport

If you intend to fly in and fly out of Prominent Hill mining camp, this is what you can expect to see when you arrive and depart. The airport terminal is just a short walk along this gravel runway.

Fly-In and Fly-Out of Prominent Hill Mine